I-DZ-4I-Motor Stator RecyclingUmshini
Amandla: 4KW/380V
Ububanzi obusebenzayo: Ukugaywa kabusha kwe-copper winding of stator ngaphakathi kuka-Φ8cm - Φ25cm.
Isivinini: 8-30p/h
Ubukhulu (L * W * H): 180cm * 90cm * 195cm Isisindo: 1450Kg
Izinzuzo:
1. Le mishini ingumkhiqizo wethu ozithuthukisile, ohloswe ngokusebenza kahle okuphezulu, ngemuva kokusika i-stator ngesigamu, ingakwazi ukukhipha yonke i-copper winding ngaphakathi kwezikhathi ezingu-2, okuwukusebenza okuphezulu kwezomnotho.
2. Ukubukeka okuhle nesakhiwo esinengqondo.
3. Ukusebenzisa isilinda esindayo, i-torque enkulu, ingakwazi ukumelana nemithwalo ephezulu.
4. Sisebenzisa uhlobo oludumile lwamazwe ngamazwe lwe-hydraulic solenoid valve enempilo ende.
5. Impahla ye-fixture iyinsimbi ye-alloy ehlala isikhathi eside.
6. Ukucutshungulwa kwezinto zokusebenza ngaphandle kokulahlekelwa yinsimbi, enenani elithuthukisiwe lokugaywa kabusha, futhi ayihambisani nemvelo.
I-LTJ-5 Motor StatorUmshini Wokugaywa kabusha(UMSHINI WOKUDULA THUSI)
Ububanzi obusebenzayo: Khipha i-copper winding of stator phakathi kuka-Φ8cm - Φ50cm
Amandla: 5.5KW/380V/50HZ Isivinini: 15-100 ucezu/ihora
Ubukhulu bomshini:3000mm*1000mm*1250mm(L* W*H)
Isisindo Esiphelele: 530Kg
Ubukhulu bephakheji: 920mm*2950mm*1380mm (L* W*H)
Isisindo Esiphelele: 778Kg
Izinzuzo:
1. Le mishini ingumkhiqizo wethu ozithuthukisile, oqondiswe ngokusebenza kahle okuphezulu kanye nenzuzo ephezulu yezomnotho.
2. Ukubukeka okuhle okunesakhiwo esinengqondo, indawo yokusebenza enenqubo eboshwe ngepulasitiki iphumela ekuphikisweni kokugqwala futhi ihlala njalo njengentsha.
3. Ukusebenzisa isilinda se-torque ephezulu, engamelana nemithwalo ephezulu yokusebenza ngamandla.
4. Ukusebenzisa imikhiqizo yamazwe ngamazwe (njenge-Yuken) yezingxenye ze-hydraulic, enesistimu yokupholisa umoya ukuvimbela izinga lokushisa likawoyela ukuthi likhuphuke kakhulu ngesikhathi sokusebenza.
5. Sisebenzisa i-SCHNEIDER, SIEMENS, ne-CHNT ohlelweni lokulawula ugesi.
6. Uzipho lwakhiwe ngensimbi yamathuluzi eshizolo, enamandla amakhulu futhi ayigugi.
7. Ukucutshungulwa kwezinto zokusebenza ngaphandle kokulahlekelwa yinsimbi, enenani elithuthukisiwe lokugaywa kabusha, futhi ayihambisani nemvelo.
8. Imishini yakhelwe ngomnyango wokungena, inkinobho yokumisa izimo eziphuthumayo ukuze kuqinisekiswe ukuphepha.Futhi yamukelwa Isitifiketi se-CE, ngokuhambisana ne-European Safety Standards.
I-ZTJ-4 Motor Stator Recycling Machine (UMSHINI WOKUSIKA ITHUPHA)
Ububanzi obusebenzayo: Sika umkhawulo owodwa wokuzulazula kwe-stator phakathi kuka-Φ8cm-Φ30cm, kuwukwelashwa kwangaphambili komshini Wokudonsa Wethusi.
Amandla: 4KW/380V Isivinini: 20-150 ucezu/ihora
Ubukhulu: 140cm*110cm*165cm(L*W*H) Isisindo: 430Kg
Ubukhulu bephakheji: 1630mm*1300mm*1710mm (L* W*H) Isisindo Esiphelele: 515Kg
I-DZ-3 Motor Stator Recycling Machine
Isicelo: Ukuze kucutshungulwe ukucaciswa kwe-stator eyodwa (njengomshini wokuwasha motor stator, njll.), ukuhlukanisa ama-winding ethusi kanye nama-laminations.
Ububanzi obusebenzayo: Ububanzi be-Stator bangaphakathi obungu-40-60mm, ububanzi bangaphandle be-Stator> 100mm, ukujiya kwensimbi ye-Silicon <50mm
Amandla: 300-600 piece / ihora
Lx W x H: 115cm*70cm*90cm
(Kungenziwa ngokwezifiso ngokuya ngezidingo zekhasimende)
Amandla: 4KW/380V